Waste Tire Cutter

1. This tire cutter has automatic control system. 2. Simple structure 3. Small space 4. Certificate: CE, ISO

Application

        This waste tire cutter is used for  beading the tire with the outer diameter =<Ø1200mm under normal temperature, its goal is to judge the tire, for facilitating the following wiredrawing working procedure march.

Main Parts: 

     The motor, the tire baffle, the guidance board, the blade, the pulley, the rack, the oil cylinder, the hydraulic pressure stand, the spare parts and so on .

Working princeple

      The motor by the shaft coupling impetus oil pump to high-speed processing, provides the high-pressure oil, leads the piston rod to reciprocal motion. when The equipment starts moving, the cylinder impetus the blade stretches, installed on the car, out of the tire back plate, then hangs the inner loop of one side of the tire onto the knife cancels, after that the knife retracts in the tire back plate by the cylinder impetus, under the guidance function of the guidance board, depending upon the knife ,the cutting edge bead the tire.

Main technical parameters

Main working power (kw)	7.5
Cylinder working pressure (Mpa)	16
Maximum cylinder working pressure (Mpa)	18
Maximum outer diameter (mm)	1200
Cylinder power stroke (mm)	350
Capacity (PCS/h)	60
Weight (kg)	1200
Dimension (mm)	2300*1000*1200

Advantages

 1. The cutter body uses the high quality alloy steel plate, the guidance surface and the cutting edge uses the antifriction metal welding rod of high degree of hardness. the service life is long.

2. The tire imposition is easy, the knife reciprocation power stroke is short, the equipment output is high.

3 .Two workings: manual and the automatic method, the operation is simple.

4 .The structures are simple, small weight, and small space  

Waste Tire Cutter